Introduce bamboo wood fiber siding installation details
Bamboo wood fiber wainscoting board is a decoration material, which is the replacement product of wallpaper and coating. Its advantages are obviously different from other wall decoration products on the market. The surface of bamboo and wood fiber siding board not only has colorful patterns, but also has a strong three-dimensional sense. It has the advantages of "heat insulation, sound insulation, waterproof and moisture-proof, and convenient installation". Bamboo and wood fiber wall panels are committed to the research and development of products that adhere to the concept of environmental protection. The use of integrated wall surfaces in the home improvement process not only solves the disadvantages of home improvement pollution and cumbersome procedures, but also is a new breakthrough in environmental protection concepts.
I. Classification of bamboo and wood fiber siding: seamless board and V seam board.
Second, installation accessories: 1. Fasteners: mainly used to install and fix integrated wall panels and rough room walls; 2. conventional fasteners: mainly used to install 80 decorative lines, 60 decorative lines, door cover lines; 3, 40 Socket: It is mainly used to install top line and skirting line.
Third, bamboo wood fiber wall board installation and processing details: 1. Bend at right angles. During the bending process, the bending line must take the wall thickness into account during the bending process. Note that the bending line is drawn first, and then taken. Polyurethane material is generally about 8mm. Bend as straight as possible. 2. 45-degree splicing of concave-convex plates: After cutting the plate at 45-degrees, the burrs are flattened and then spliced. Note that the joints are neat. 3. Right-angle splicing of concave-convex plates: The inner side of the splicing plate is polished at a 45-degree angle for inserting and inserting. Pay attention to the angle control when grinding. 4. Stitching of the inner corner of the concave-convex plate: The outer side of the splicing plate is polished at a 45-degree angle for inserting and inserting. Pay attention to the angle control when grinding, the principle is the same as right-angle stitching. 5. Closing after material installation: Generally, after the materials are neatly spliced, there is no need to close. However, due to the difference between the actual installation environment and the level of regional woodworking installation, the closing is too large. At this time, corner processing is required. 6. After bending the bamboo-wood fiber wall panel, the connection points should be bonded as much as possible.
V. Attentions: 1. During the installation process of bamboo and wood fiber siding boards, start from the top. During the cutting of the board, the material must be cut straight and free of burrs. The measurement must be within 2mm, otherwise it will cause spelling. The seams are not neat and affect the final effect. 2. Wall and background wall installation. In this installation process, if you need to use the corner line, foundation line, waist line, door cover line, window cover line, etc., you must install the line first, and then install the bamboo fiber fiber retaining wall. board.